Templates

Equipment Out of Order Report Form (Free Template)

Free equipment out of order report form in Word or plain text. Record the fault, tag and hold the item, log follow-up and record who released it.

BJKBrandon J. King · Founder, WhoHasGearPublished ◷ 8 min read
WhoHasGear title card: Equipment Out of Order Report Form, free editable Word and plain-text template, with three steps labelled Report, Hold and Release

An equipment out of order report form records one item that is not working: what was observed, when, who tagged it, where it is held and who decided it could go back into use. This free Word and plain-text form adds a cut-out tag and a hold register to help teams notice unresolved holds before an item returns to the shelf or a booking.

Summarize this article with AI

Summarize the manual out-of-order workflow and its limits, with a source link where supported.

Download the equipment out of order report form

Download the editable Word form or the identical-content plain-text form. Both include the instructions, the five report sections, a cut-out out-of-order tag, a hold register and the completed projector example below. No signup is required.

The Word file uses editable text and tables. Print one form per faulty item, or keep the hold register on the equipment desk so anyone can see what is out of service.

When should you fill in an out of order report?

Fill one in as soon as someone notices that an identified item is not working as it should: a projector that flickers, a microphone that cuts out, a tripod with a stripped head. Record what is known now; the cause can wait.

Use it for an item you have in hand. If you cannot find the item at all, use the missing equipment report form instead. If the item goes to an outside repair shop, keep this form for the hold and the release decision, and track the shop round trip on an equipment repair tracking log.

What should the report record?

Identity first: asset tag or item ID, serial number, a plain description and whether it is one component of a kit. Then the fault in observed facts: what happened, any error message or warning light, visible damage and which basic checks were already tried, such as a different cable or socket.

Record the last borrower or session only as a record. A fault found after a loan is not proof that the borrower caused it, and the form does not ask anyone to assign blame.

If anyone notices smoke, heat, exposed wiring or another possible hazard, the form tells them to stop using the item, not to run further checks or move it unless your organization’s procedures permit this, and to notify the responsible person. It does not replace your organization’s own safety procedures.

How do you keep a broken item out of use?

Attach the out-of-order tag from section 6, move the item to a named hold location and remove it from shelf checkout and future bookings. Write down who did each step and when, and who told any borrower whose booking is affected.

Then add one line to the hold register. The register keeps one line per reported item, with a follow-up owner, a next check date and a status, so open holds do not depend on one person’s memory. Closed lines stay as history.

Who releases it back into service?

Removing a tag is not a release. Section 5 records the decision: released to service, retired or still on hold, who decided, and what was checked before the decision, in plain words. Still on hold means the tag stays on and bookings stay blocked; a retired item does not return to circulation.

Pick the people who may release equipment before you need them, for example the AV lead or the equipment coordinator. A release records your team’s decision; it does not certify that the item is safe or will not fail again.

Complete form, tag, hold register and worked example

The full download content follows in the same order. The fictional example follows a classroom projector from the first report to its release, and shows a second item still at an outside repair shop on the hold register.

Equipment Out of Order Report Form

  • WhoHasGear | Free editable template | November 6, 2026
  • Use one form for one identified item that is not working as it should. Fill section 1 and 2 when the fault is noticed, attach the tag in section 6, and keep the form until the item is released or retired.
  • Write what you saw, heard or read on a screen. Do not guess the cause. Include the date, time and time zone with every entry.
  • Out of order means the item stays off the shelf and out of bookings until a named person records a release decision in section 5. Removing the tag is not a release.
  • This is an internal recordkeeping form. It is not a lockout/tagout procedure, a safety inspection, a repair certificate or a warranty claim. For machinery, electrical or other hazards, follow your organization's own safety procedures first.
  • These are proposed fields, not an institutional standard. WhoHasGear has not field-tested this template with an operator team.
  • Source guide: https://whohasgear.com/blog/equipment-out-of-order-report-form

1. Report and equipment identity

  • Report ID: __________ | Reported by (name or internal ID): __________
  • Fault noticed — date / time / time zone: __________ | Reported — date / time / time zone: __________
  • Asset tag / item ID (or Unknown): __________ | Serial number (or Unknown): __________
  • Make / model / plain description: __________
  • Whole item or one component of a kit: __________ | Parent kit ID: __________
  • Where it was when the fault was noticed: __________
  • Last borrower or session, if known (record only, not a finding of fault): __________

2. What is wrong (observed facts only)

  • What happened, in plain words: __________
  • Exact error message, light or sound, if any: __________
  • Visible damage (crack, bent pin, loose part, liquid, burn mark) or None seen: __________
  • If there is a possible hazard, stop using the item. Do not perform further checks or move it unless your organization's procedures permit this. Notify the appropriate responsible person.
  • Basic checks already tried (power, cable, battery, restart) and result: __________
  • Does the fault happen every time, sometimes, or once so far: __________
  • Private photo reference, if taken: __________
  • Safety concern noticed (smoke, heat, exposed wiring, sharp edge)? Yes / No / Unsure. If Yes or Unsure: stop using it and tell __________

3. Hold: tag, location and bookings

  • Out-of-order tag attached — tag number / by / date and time: __________
  • Moved to hold location (shelf, bin or room): __________ | Moved by: __________
  • Removed from shelf checkout and future bookings — by / date and time: __________
  • Borrowers or upcoming bookings affected and who told them: __________
  • Substitute item issued, if any (item ID / to whom): __________
  • Follow-up owner: __________ | Next check date: __________

4. Follow-up log

  • Add one row per action. Keep earlier rows; do not overwrite them. If the item is sent to an outside repair shop, open a separate repair record and write its reference here.
Date / time / zoneAction takenByResult and next step

5. Release or retire decision

  • Decision: Released to service / Retired / Still on hold | Date / time / zone: __________
  • Decided by (person authorized by your team to release equipment): __________
  • What was checked before release, described in plain words: __________
  • Tag removed by / date and time: __________ | Returned to shelf location: __________
  • Bookings reopened by / date and time: __________
  • Still on hold means the tag stays attached and bookings stay blocked. A retired item does not return to circulation.
  • If retired: disposal or parts note and inventory record updated by: __________
  • A release records your team's decision. It does not certify that the item is safe or will not fail again.

6. Out-of-order tag (cut out and attach)

  • OUT OF ORDER — DO NOT USE OR LEND
  • Item ID: __________ | Report ID: __________
  • Fault in a few words: __________
  • Tagged by: __________ | Date: __________
  • Questions: ask __________ before moving or using this item.
  • Do not remove this tag until your team's authorized person has recorded a Released to service or Retired decision in section 5. Record who actually removed the tag and when.

7. Out-of-order hold register

  • Keep one line per reported item. Mark released or retired items closed, retain their history, and use the Status column to identify active holds.
Report IDItem IDFault in briefTagged onHold locationFollow-up ownerNext checkStatus

Completed example: classroom projector P-07 (fictional)

  • Report ID: OOO-2026-014 | Reported by: J. Ortiz (AV volunteer)
  • Fault noticed: Tue Nov 3, 2026, 18:40 ET | Reported: Tue Nov 3, 2026, 18:55 ET
  • Asset tag: P-07 | Serial: Unknown (label worn) | Portable projector, ceiling-bag kit, case 3
  • Whole item | Parent kit: AV-KIT-3 | Noticed in: Fellowship hall, side table
  • Last session: Youth night setup, Nov 3 (record only, not a finding of fault)
  • What happened: projector powered on, fan ran, image flickered and went dark after about two minutes, three times in a row.
  • Message or light: orange lamp light flashing. Visible damage: None seen. Checks tried: different HDMI cable and wall socket; same result.
  • Happens: every time so far. Photo: private album, entry 2026-11-03-P07. Safety concern: No.
  • Hold: tag T-031 attached by J. Ortiz, Nov 3 19:00 ET. Moved to AV closet, red bin, by J. Ortiz.
  • Removed from checkout and bookings: M. Chen, Nov 4 09:10 ET. Affected: Sunday 9 am class booking; M. Chen told the teacher.
  • Substitute: P-04 issued to the Sunday class. Follow-up owner: M. Chen | Next check: Nov 6.
  • Decision (Nov 6, 16:30 ET): Released to service by M. Chen (AV lead). Checked: lamp seated, filter cleaned, 45-minute test run with no flicker.
  • Tag removed by M. Chen, Nov 6 16:35 ET. Returned to: AV-KIT-3, shelf B2. Bookings reopened: M. Chen, Nov 6 16:40 ET.
Date / time / zoneAction takenByResult and next step
Nov 4, 09:10 ETReviewed the available troubleshooting guidanceM. ChenArranged a follow-up check for Nov 6 without assigning a confirmed cause
Nov 6, 15:40 ETCleaned dust filter, reseated lamp moduleM. ChenRun a 45-minute test before deciding
Nov 6, 16:25 ET45-minute test run in AV closetM. ChenNo flicker, no warning light; release decision in section 5

Completed example: hold register (fictional)

  • The register on Nov 6 at 17:00 ET, after P-07 was released. MIC-12 is still on hold; its outside repair has its own repair record.
Report IDItem IDFault in briefTagged onHold locationFollow-up ownerNext checkStatus
OOO-2026-014P-07Image flickers, lamp light flashingNov 3AV closet, red binM. Chen—Released Nov 6
OOO-2026-015MIC-12Wireless mic cuts out, cracked battery doorNov 5AV closet, red binM. ChenNov 13At outside repair, ref RT-2026-008

Which form do you need?

Item in hand but not working: this out of order report. Item cannot be found: the missing equipment report form. Item at an outside repair shop, or a loaner covering for it: the equipment repair tracking log.

Item came back from a loan missing a part: check it against its manifest with the equipment kit return checker. Item passing from one person to another: the equipment handover form.

What sources informed this form?

Published fault and out-of-order forms share a few core ideas. The American Postal Workers Union describes the U.S. Postal Service PS Form 4707 Out of Order notice as a red tag: defective equipment is removed from service and tagged, and employees should not remove the tag before the equipment is assessed and repaired. The University of Hawaiʻi Center for Instructional Support trouble report asks for the building and room, a detailed description of the problem and any troubleshooting already attempted. A Southeast Region Career and Technology Center equipment service report asks instructors to describe the unit, its serial number and the problem.

Those forms belong to their own organizations; this template does not reproduce them. The separate hold, release decision, cut-out tag and hold register here are an original recordkeeping aid, not an operator-tested process or an industry standard. Sources were reviewed November 6, 2026.

  1. APWU: How to Use a PS Form 4707 to Enforce Workplace Safety (May 15, 2025) ↗
  2. University of Hawaiʻi CIS: Trouble Report Form ↗
  3. Southeast Region Career and Technology Center: Equipment Service Report (PDF) ↗

Who this form fits — and its limits

It suits schools, churches, AV and media teams, makerspaces, clubs and small offices that lend shared equipment from one desk and need a broken item to stay out of circulation until someone has looked at it.

It is not a lockout/tagout procedure, a safety inspection, a maintenance work order system, a repair certificate or a warranty claim. For machinery, electrical or other workplace hazards, follow your organization’s own procedures and the equipment manufacturer’s instructions.

When a paper hold register stops being enough

A paper register works while one desk lends the equipment. It gets harder when several people check items out, because whoever is at the desk has to know which items are on hold before they hand anything over.

WhoHasGear is QR-based equipment checkout and reservation software for small teams.

This form is separate from the software and does not sync with it. When you want checkouts, due dates and custody history in one place, see WhoHasGear equipment checkout software and its pricing.

Related guides