Equipment Out of Order Report Form WhoHasGear | Free editable template | November 6, 2026 Use one form for one identified item that is not working as it should. Fill section 1 and 2 when the fault is noticed, attach the tag in section 6, and keep the form until the item is released or retired. Write what you saw, heard or read on a screen. Do not guess the cause. Include the date, time and time zone with every entry. Out of order means the item stays off the shelf and out of bookings until a named person records a release decision in section 5. Removing the tag is not a release. This is an internal recordkeeping form. It is not a lockout/tagout procedure, a safety inspection, a repair certificate or a warranty claim. For machinery, electrical or other hazards, follow your organization's own safety procedures first. These are proposed fields, not an institutional standard. WhoHasGear has not field-tested this template with an operator team. Source guide: https://whohasgear.com/blog/equipment-out-of-order-report-form 1. Report and equipment identity Report ID: __________ | Reported by (name or internal ID): __________ Fault noticed — date / time / time zone: __________ | Reported — date / time / time zone: __________ Asset tag / item ID (or Unknown): __________ | Serial number (or Unknown): __________ Make / model / plain description: __________ Whole item or one component of a kit: __________ | Parent kit ID: __________ Where it was when the fault was noticed: __________ Last borrower or session, if known (record only, not a finding of fault): __________ 2. What is wrong (observed facts only) What happened, in plain words: __________ Exact error message, light or sound, if any: __________ Visible damage (crack, bent pin, loose part, liquid, burn mark) or None seen: __________ If there is a possible hazard, stop using the item. Do not perform further checks or move it unless your organization's procedures permit this. Notify the appropriate responsible person. Basic checks already tried (power, cable, battery, restart) and result: __________ Does the fault happen every time, sometimes, or once so far: __________ Private photo reference, if taken: __________ Safety concern noticed (smoke, heat, exposed wiring, sharp edge)? Yes / No / Unsure. If Yes or Unsure: stop using it and tell __________ 3. Hold: tag, location and bookings Out-of-order tag attached — tag number / by / date and time: __________ Moved to hold location (shelf, bin or room): __________ | Moved by: __________ Removed from shelf checkout and future bookings — by / date and time: __________ Borrowers or upcoming bookings affected and who told them: __________ Substitute item issued, if any (item ID / to whom): __________ Follow-up owner: __________ | Next check date: __________ 4. Follow-up log Add one row per action. Keep earlier rows; do not overwrite them. If the item is sent to an outside repair shop, open a separate repair record and write its reference here. Date / time / zone | Action taken | By | Result and next step ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ 5. Release or retire decision Decision: Released to service / Retired / Still on hold | Date / time / zone: __________ Decided by (person authorized by your team to release equipment): __________ What was checked before release, described in plain words: __________ Tag removed by / date and time: __________ | Returned to shelf location: __________ Bookings reopened by / date and time: __________ Still on hold means the tag stays attached and bookings stay blocked. A retired item does not return to circulation. If retired: disposal or parts note and inventory record updated by: __________ A release records your team's decision. It does not certify that the item is safe or will not fail again. 6. Out-of-order tag (cut out and attach) OUT OF ORDER — DO NOT USE OR LEND Item ID: __________ | Report ID: __________ Fault in a few words: __________ Tagged by: __________ | Date: __________ Questions: ask __________ before moving or using this item. Do not remove this tag until your team's authorized person has recorded a Released to service or Retired decision in section 5. Record who actually removed the tag and when. 7. Out-of-order hold register Keep one line per reported item. Mark released or retired items closed, retain their history, and use the Status column to identify active holds. Report ID | Item ID | Fault in brief | Tagged on | Hold location | Follow-up owner | Next check | Status ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ Completed example: classroom projector P-07 (fictional) Report ID: OOO-2026-014 | Reported by: J. Ortiz (AV volunteer) Fault noticed: Tue Nov 3, 2026, 18:40 ET | Reported: Tue Nov 3, 2026, 18:55 ET Asset tag: P-07 | Serial: Unknown (label worn) | Portable projector, ceiling-bag kit, case 3 Whole item | Parent kit: AV-KIT-3 | Noticed in: Fellowship hall, side table Last session: Youth night setup, Nov 3 (record only, not a finding of fault) What happened: projector powered on, fan ran, image flickered and went dark after about two minutes, three times in a row. Message or light: orange lamp light flashing. Visible damage: None seen. Checks tried: different HDMI cable and wall socket; same result. Happens: every time so far. Photo: private album, entry 2026-11-03-P07. Safety concern: No. Hold: tag T-031 attached by J. Ortiz, Nov 3 19:00 ET. Moved to AV closet, red bin, by J. Ortiz. Removed from checkout and bookings: M. Chen, Nov 4 09:10 ET. Affected: Sunday 9 am class booking; M. Chen told the teacher. Substitute: P-04 issued to the Sunday class. Follow-up owner: M. Chen | Next check: Nov 6. Decision (Nov 6, 16:30 ET): Released to service by M. Chen (AV lead). Checked: lamp seated, filter cleaned, 45-minute test run with no flicker. Tag removed by M. Chen, Nov 6 16:35 ET. Returned to: AV-KIT-3, shelf B2. Bookings reopened: M. Chen, Nov 6 16:40 ET. Date / time / zone | Action taken | By | Result and next step Nov 4, 09:10 ET | Reviewed the available troubleshooting guidance | M. Chen | Arranged a follow-up check for Nov 6 without assigning a confirmed cause Nov 6, 15:40 ET | Cleaned dust filter, reseated lamp module | M. Chen | Run a 45-minute test before deciding Nov 6, 16:25 ET | 45-minute test run in AV closet | M. Chen | No flicker, no warning light; release decision in section 5 Completed example: hold register (fictional) The register on Nov 6 at 17:00 ET, after P-07 was released. MIC-12 is still on hold; its outside repair has its own repair record. Report ID | Item ID | Fault in brief | Tagged on | Hold location | Follow-up owner | Next check | Status OOO-2026-014 | P-07 | Image flickers, lamp light flashing | Nov 3 | AV closet, red bin | M. Chen | — | Released Nov 6 OOO-2026-015 | MIC-12 | Wireless mic cuts out, cracked battery door | Nov 5 | AV closet, red bin | M. Chen | Nov 13 | At outside repair, ref RT-2026-008