Templates

Tool Sign-Out Sheet Template (Free Word Download)

Free tool sign-out sheet for a shared tool crib: parts out and back for each kit, condition at issue and return, an end-of-shift check and an exception log.

BJKBrandon J. King · Founder, WhoHasGearPublished ◷ 9 min read
WhoHasGear title card: Tool Sign-Out Sheet Template, free editable Word and plain-text sheet for shared tool cribs, with three steps labelled Issue, Return and Shift check

A tool sign-out sheet is a running register for a shared tool crib: one line per tool or kit, showing who took it, where it went, which parts went with it and whether everything came back. This free Word and plain-text sheet counts kit parts out and back, records condition at both ends, and adds an end-of-shift check and an exception log, so a missing battery or a damaged saw stays open instead of hiding behind a tick next to “drill”.

Summarize this article with AI

Prompts include this article URL, WhoHasGear as the source, and the free tier.

Download the tool sign-out sheet

Download the editable Word sheet or the identical-content plain-text sheet. Both include instructions and line statuses, crib and shift details, a 10-line sign-out register, an end-of-shift check, an exception log and the completed example below. No signup is required.

These are manual files, not an online form or software feature. The Word file is in landscape so the register fits across the page. Print one sheet per crib per shift, or keep an editable copy per crib and date, and add rows as needed.

Complete blank sheet and worked example

The full download content follows in the same order. The register, the end-of-shift check and the exception log all use the tool ID, so every open item points back to one tool and one line.

Tool Sign-Out Sheet Template

  • WhoHasGear | Original manual recordkeeping aid | November 18, 2026
  • One sheet per tool crib per shift. Each tool or kit that leaves the crib gets its own line, so you can see who has it, where it went, which parts went with it, and what is still out when the shift ends.
  • How to use: fill the crib and shift details, then write one line for each tool or kit as it is issued. Under Parts out, list every part that leaves with it and how many, for example: drill 1, battery 2, charger 1, case 1. When it comes back, count the parts again under Parts back, note the condition and sign the line in. At the end of the shift, check every line that is not Closed and complete the end-of-shift check.
  • A tool kit is only back when every part is back. If one battery is missing, the line stays open even though the drill is on the shelf. A missing part can be formally reconciled without being found, but only through your organization's authorized resolution process, recorded in the exception log. A note saying “battery missing” is not enough.
  • Condition out and Condition in are what the person at the crib can see, such as a cracked guard or a frayed cord. They are not a safety or operational inspection.
  • If a tool comes back damaged, mark it Returned, tagged out and keep it off the shelf until the person your organization authorizes has inspected or cleared it.
  • Use full dates and times. Keep earlier entries and add dated corrections with author and reason rather than overwriting them. Record only the borrower details your organization needs, and store completed sheets in an access-controlled place.
  • This is a record, not a policy or a contract. It contains no fee, liability or discipline terms. Use your organization's own approved rules for those.
  • This original worksheet has not been tested by operators. The completed example is fictional, not an organization's outcome.
  • Source guide: https://whohasgear.com/blog/tool-sign-out-sheet-template
Line statusMeaning on this sheet
ClosedEvery issued tool and part has been returned or formally reconciled through an approved, documented resolution; condition at return is recorded, the return is signed in, and no unresolved damage or other exception remains. Only authorized staff close a line.
Open: parts missingThe tool is back but fewer parts came back than went out. The line stays open until the missing parts are back or authorized staff formally reconcile them through the organization's approved resolution process, recorded in the exception log.
Open: overdueNothing has come back and the due-back time has passed. The end-of-shift check names a follow-up owner.
Returned, tagged outEverything is back, but damage or a fault was reported. The tool is not reissued until the organization's authorized person has inspected or cleared it. The exception stays open until authorized staff document the inspection outcome, any repair or clearance decision, and the resolution date. A tool must not be reissued unless it has been cleared for use.
Missing toolThe tool itself has not come back and the borrower or the follow-up owner cannot say where it is. It goes in the exception log with its last recorded custody event.

Blank crib and shift details

  • Tool crib or storage location: ____________________
  • Date: ____________________
  • Shift (start and end time): ____________________
  • Crib staff on this shift: ____________________
  • Staff member doing the end-of-shift check: ____________________
  • Tools already out from an earlier shift (tool IDs): ____________________
  • Tools already tagged out before this shift (tool IDs): ____________________
  • Who to report missing or damaged tools to: ____________________

Blank tool sign-out register

  • One line per tool or kit. Add rows as needed. Parts out and Parts back list each part with its quantity. Status: Closed / Open: parts missing / Open: overdue / Returned, tagged out / Missing tool.
Tool ID / asset tagTool or kitParts out (qty)BorrowerJob, site or work areaCondition outDate / time outDue backBorrower initialsParts back (qty)Condition inDate / time inReceived byStatus

Blank end-of-shift check

  • Complete this before the crib closes or is handed to the next shift. Check every register line that is not Closed, including lines carried over from earlier shifts.
End-of-shift itemEntry
Lines opened this shift
Lines closed this shift
Open: parts missing (tool IDs and missing parts)
Open: overdue (tool IDs)
Returned, tagged out (tool IDs)
Missing tool (tool IDs)
Follow-up owner
Next follow-up (date / time)
Checked by (name and initials)
Date / time of check

Blank exception log

  • One line per tool and per problem: parts missing, overdue, damaged and tagged out, or a missing tool. Keep the line until it has a resolution and a resolved date.
Tool IDType (Parts missing / Overdue / Damaged, tagged out / Missing tool)What is missing or what was seenLast known borrower and locationLast recorded custody eventReported by / whenFollow-up ownerNext follow-upResolutionResolved date

Completed example: maintenance shop crib, day shift

  • Fictional example. A five-person facilities maintenance team shares one tool crib. On November 18, 2026, the day shift runs 7:00 to 15:30 and R. Silva (fictional) runs the crib. Damaged tools are reported to the shop supervisor.
Tool ID / asset tagTool or kitParts out (qty)BorrowerJob, site or work areaCondition outDate / time outDue backBorrower initialsParts back (qty)Condition inDate / time inReceived byStatus
DRL-0418V drill kitDrill 1, battery 2, charger 1, case 1J. ParkBuilding C restroom repairNo visible damageNov 18, 07:10Nov 18, 15:00JPDrill 1, battery 1, charger 1, case 1No visible damageNov 18, 14:40RSOpen: parts missing
SAW-027-1/4 in. circular sawSaw 1, blade guard 1T. ReyesLoading dock rampNo visible damageNov 18, 07:25Nov 18, 15:00TRSaw 1, blade guard 1Lower guard cracked and stickingNov 18, 13:55RSReturned, tagged out
LAS-01Cross-line laser kitLaser 1, tripod 1, case 1M. ChenGym ceiling gridNo visible damageNov 18, 08:05Nov 18, 12:00MCLaser 1, tripod 1, case 1No visible damageNov 18, 11:50RSClosed

Completed example: end-of-shift check

    End-of-shift itemEntry
    Lines opened this shift3
    Lines closed this shift1 (LAS-01)
    Open: parts missing (tool IDs and missing parts)DRL-04: 1 battery
    Open: overdue (tool IDs)None
    Returned, tagged out (tool IDs)SAW-02
    Missing tool (tool IDs)None
    Follow-up ownerR. Silva for DRL-04; shop supervisor for SAW-02
    Next follow-up (date / time)Nov 19, 07:30
    Checked by (name and initials)R. Silva, RS
    Date / time of checkNov 18, 15:20

    Completed example: exception log

      Tool IDType (Parts missing / Overdue / Damaged, tagged out / Missing tool)What is missing or what was seenLast known borrower and locationLast recorded custody eventReported by / whenFollow-up ownerNext follow-upResolutionResolved date
      DRL-04Parts missing1 of 2 batteries not returnedJ. Park, Building C restroom repairKit returned to crib Nov 18, 14:40, received by RSRS, Nov 18, 14:40R. SilvaNov 19, 07:30: J. Park checks Building C and the vanOpen
      SAW-02Damaged, tagged outLower blade guard cracked and stickingT. Reyes, loading dock rampSaw returned to crib Nov 18, 13:55, received by RST. Reyes and RS, Nov 18, 13:55Shop supervisorNov 19, 07:30: inspection or clearance by the authorized personOpen: held off the shelf

      Completed example: why two lines are still open

      • DRL-04 came back with one battery instead of two. The drill is on the shelf, but the Parts back count does not match Parts out, so the line stays Open: parts missing.
      • Nobody writes Closed on DRL-04 until the second battery is back or authorized staff formally reconcile it through the organization's approved resolution process and record that in the exception log.
      • SAW-02 came back complete, but the lower guard is cracked and sticking. Its status is Returned, tagged out, and it stays off the shelf until the authorized person has inspected or cleared it. Even when its custody record is eventually closed, it is only reissued if it has been cleared for use.
      • LAS-01 came back with every part and no visible damage, so it is the only Closed line.
      • The end-of-shift check names a follow-up owner and a next follow-up for each open line, so the next shift starts with the same two open items instead of a shelf that only looks complete.

      How to run a tool crib with this sheet

      Issue: write one line per tool or kit as it leaves. Fill in the tool ID, the borrower, the job or work area and the due-back time, and list every part that goes with it under Parts out. Look at the tool, write what you see under Condition out, and have the borrower initial the line.

      Return: when it comes back, count the parts again and write them under Parts back. Note the condition you can see, the time in and who received it. If every part is back and nothing is damaged, mark the line Closed.

      End of shift: go down every line that is not Closed, including lines carried over from earlier shifts. Fill in the end-of-shift check, name a follow-up owner and a next follow-up for each open line, and sign it. The next shift starts from that list, not from a shelf that only looks complete.

      What should a tool sign-out sheet include?

      At minimum: a tool ID or asset tag and description, the borrower, the job, site or work area, the date and time out, the due-back time, the borrower’s initials, the time in and who received it. A condition note at issue and at return shows when a problem appeared.

      For a crib that issues kits, add the parts and quantities that go out and come back. Standard template columns such as borrower, job and condition are already common on other sign-out sheets. The part counts, the end-of-shift check and the exception log are what keep an incomplete kit or a damaged tool from being treated as returned.

      How do you sign out a tool kit with batteries and chargers?

      List each part with its quantity under Parts out, for example: drill 1, battery 2, charger 1, case 1. When the kit comes back, count the same parts under Parts back. If one battery is missing, the status is Open: parts missing, even though the drill is back on the shelf.

      Don’t let a tick next to “drill” close the line. Keep it open until the missing part is back, or until authorized staff formally reconcile it through your organization’s approved resolution process and record that in the exception log. A note saying “battery missing” is not enough. Only authorized staff close a line.

      What if a tool comes back damaged?

      Record what you can see under Condition in, set the status to Returned, tagged out and keep the tool off the shelf. It should not be reissued until the person your organization authorizes has inspected or cleared it. Add a line to the exception log with a follow-up owner. The exception stays open until authorized staff document the inspection outcome, any repair or clearance decision and the resolution date. Closing the custody record does not by itself mean the tool is safe to issue again.

      The condition columns are a record of what was visible at the crib, not a safety or operational inspection. To record the fault, take the tool out of use and log its return to service, use the equipment out-of-order report form.

      What if a tool is not returned at the end of the shift?

      If it is past its due-back time and nobody has brought it back, the status is Open: overdue. List it on the end-of-shift check with a follow-up owner and a next follow-up time. If the borrower or the follow-up owner cannot say where it is, change the status to Missing tool.

      For a missing tool, add a line to the exception log with the tool ID, the last known borrower and location, the last recorded custody event and the next follow-up. If it is still missing after a search, use the missing equipment report form to document the search and its closure.

      Which sheet or log do you need?

      Use this tool sign-out sheet at a shared tool crib, shop or tool room, where several people take tools and kits during a shift and someone has to check what is still out before the crib closes.

      If you would rather keep the record in a spreadsheet, the guide to an equipment checkout log in Excel shows how to build one with status dropdowns and overdue highlighting. For general equipment on a desk or front-counter sheet, the equipment sign-out sheet generator prints a blank sign-out sheet.

      More free forms and tools are collected in templates and tools and the equipment checkout guides.

      What sources informed this sheet?

      Published university tool-crib and shop procedures informed the fields. Ferris State University’s manufacturing tool crib requires every tool to be signed out on a checkout sheet, has the attendant check returned bins against that sheet and report broken or dull tools to the instructor, and has the attendant review the sheet and cabinet inventory at the end of each lab period. George Washington University’s engineering machine shop asks borrowers to fill out a tools checkout sheet and sign tools back in with shop staff. Maryland Institute College of Art’s Fiber tool crib asks students and staff to report damage or problems at check-out and check-in, and pulls reported equipment from circulation. Bowling Green State University’s Tech Stores asks that equipment come back complete, with any accessories supplied at check-out. The University of North Carolina’s maintenance safety manual recommends a check-out system at tool cribs and says dull or damaged tools shall not be returned to stock.

      Those organizations set their own rules, fees and responsibilities; this template does not reproduce them. Template sites such as ItemTally and Invenva also offer tool sign-out sheets.

      Sources were reviewed November 18, 2026. The line statuses, the part-count rule, the end-of-shift check and the worked example here are an original recordkeeping aid, not an operator-tested process or an organization’s standard.

      1. Ferris State University: Crib Operations / Tool Distribution ↗
      2. George Washington University Machine Shop: Equipment and Tools Checkout ↗
      3. Maryland Institute College of Art: Fiber Tool Crib Agreement (PDF) ↗
      4. Bowling Green State University: Tech Stores Equipment Issue Policy (PDF) ↗
      5. UNC Chapel Hill: Hand and Portable Power Tool Safety ↗

      Who this sheet fits — and its limits

      Use it for a facilities or maintenance tool crib, a school or university shop, a makerspace, or a small crew that issues tools and kits from one shared store during a shift.

      It is not a policy, contract or discipline record. It contains no fee, replacement-charge or liability terms, and it is not a safety inspection, calibration record or lockout procedure. If your organization needs those, use its own approved wording and process.

      When a paper tool sheet stops being enough

      One sheet per crib per shift works while one person runs one crib. It gets harder when several staff cover different shifts, when tools go out to more than one jobsite, or when nobody can say which battery has been missing since last week, because the history is spread across a stack of sheets and every shift has to reconcile the last one by hand.

      WhoHasGear is QR-based equipment checkout and reservation software for small teams.

      This sheet is separate from the software and does not sync with it. When you want tool checkouts, due dates and custody history in one place, see WhoHasGear equipment checkout software and its pricing.

      Related guides